Kitchen & Bathroom Remodeling ButtonPlumbing Repairs ButtonReplumb ButtonPolybutylene ButtonContact Us Button


A typical Polybutylene system is found in homes, hotels, multi-family housing, and mobile homes built between 1978 and 1996. Polybutylene was an inexpensive alternative to copper. It is much easier to install and one-third the cost of copper piping to purchase. Approximately 7 million installations of Polybutylene pipe occurred all across the United States in both interior distribution and exterior water service applications.

Do I have Polybutylene piping?

Conduct an inspection of your home to see if you have Polybutylene piping on your property. The first thing you should look for is dull gray (picture labeled: #14 or picture labeled: #15) or black piping near the water heater area and running to the fixtures (toilets, sinks, etc.) throughout the home. You will also find acetel or copper fittings with copper or aluminum crimp rings (see the fittings pictured in the photos below). Do not be fooled by copper "stub outs" which may appear under sinks and toilets, because quite often they have been crimped to Polybutylene behind the walls of the home. Additionally, you should inspect the main line or yard service line entering the dwelling from the meter (street)

Items 1 through 8 in the above photo illustrate the different types of acetel fittings used to connect Polybutylene piping together. With the exception of item #4 (pictured) these fittings were cut from their original dwelling where they were installed. The pipe is held to the fitting via a copper ring or an aluminum ring. The rings are crimped at the time of installation.

Items 9 through 12 illustrate examples of copper insert fittings used to connect Polybutylene pipe. Items 9 through 10 were cut from their original installation. Items 11 through 12 are new unused fitting. Brass fittings, which have a more square appearance, were also used.

Items 13 through 15 illustrate the three types of Polybutylene pipe. Item 13 illustrates the blue Polybutylene used on exterior yard service lines. Item 14 is the typical gray most commonly used on interior installations. Item 15 is a less frequently used black Polybutylene pipe.